Protable Air Compressor 4500Psi 30Mpa PCP Air Pump Manual Stop Airgun Tank

Description

4utoHydria
High Pressure Air Pump 110v / 60Hz @ 4500 Psi Air Compressor PCP Rife/Paintball Air Gun Filling Station
Package list:
Water pump
water pipe
Replace the filter element (filter cotton)
Drain valve
O-Rings
Rupture Disk
Breathing nozzle
High pressure trachea with filter
Notice:
1. The bottle filling of the air compressor must be greater than the pressure of the gas cylinder to fill the bottle! 【Air Compressor Pressure>Cylinder Pressure】
2. Suggestion for bottle filling: ≤ 1L
3. Use of gas cylinder: paintball shooting
4. Recommended operating time of the machine (machine operating load range): The temperature cannot exceed 85°C
5. Estimated filling time:
Recommendations for filling 1L gas cylinders:
1) The cylinder pressure is 200bar, and the estimated time is 7min
2) The cylinder pressure is 300bar, and the estimated time is 10min
WIDE APPLICATION: This pump is perfect for all Pre-Charged Pneumatic (PCP) compressed air needs Perfect for fire fighting, paintball, leakage detecting, pressure-tight test, automobiles, air impermeability test, pressure proof test, etc.
Power: 110V 60Hz; Engine power: 1.8 kW; Charging pressure: 30MPA; Working pressure: 300BAR 30MPA 4500PSI. Air pump inflation rate: 2800r / min; Working flow: 35L / min; noise less than 78 dB, air hose connector 8 mm quick coupling Oil standard: IS0 VG 46 and AW 46
Designed with two-stage compression to ensure stable performance, suitable for car tires, bicycle tires, blown pneumatic PCP air rifles, paintball tanks, air gun equipment or diving / diving cylinders
Manual shut-off: sensitive and accurate response, easy to understand reading, correct display of the air pressure value of the air compressor, convenient to check and adjust the pressure value required for different jobs.
Cooling system: The pump is designed with a stand-alone water cooling system and the temperature of the system is monitored by a battery-powered digital thermometer. You prepare the cooling water that the system will use in a bucket from which the unit will extract and return the water for cooling and recirculation. Always monitor the temperature display and water supply when using the pump to avoid overheating.You must attach the vent rods to replace the oil cap.