RW-ST01A 0-5V Load Cell Transmitter Strain Gauge Sensor PLC Force 4-20ma

Description

RW-ST01A 0-5V Load Cell Transmitter Strain Gauge Sensor PLC Force 4-20m
a
product description:
1.0~5V (10V) and 4~20mA can be output simultaneously;
0~5V and 0~10V can be adjusted by switch (see picture).
2. Built-in precision amplifier circuit, high precision,
low temperature drift, long-term stability;
3. Current and voltage outputs are provided at the same time,
selected by terminal blocks;
4. Multiple power modes
5. Input overvoltage and overcurrent protection,
output short circuit protection;
6. Strong load capacity, used with junction box,
can be connected with multiple sensors;
7. Suitable for weighing, tension, torque and other strain bridge sensors
8. The outer casing and cable connector are waterproof and have good sealing performance, which is suitable for various harsh environments;
9. Load capacity: 87Ω (four 350Ω load cells in parallel)
parameter
input signal
Full bridge strain gauge / load cell
note:
Bridge resistor: <2KΩ
Sensitivity: 1.5~2.1mV / V
Excitation voltage: 5V DC
Excitation current: <100mA @ 12V power supply
Power supply: 12~26V DC to 0~5V output and 4~20mA output
Linear: 0.3%
Temperature coefficient: 50ppm @ 10~30 degrees,
100ppm full operating temperature range
Working temperature: 0~50 degrees
Weight: 90 grams
Dimensions: 115mm × 80mm × 35mm (bolt center: 97mm)
main application:
It is used to change the output mV weak signal
(such as weighing, tension, torque sensor, etc.)
of the strain pressure sensor to a common standard analog signal,
such as 4~20mA or 0~5V (10V).
1.warranty period 120day
2.package included:1pc
On Aug-04-19 at 18:39:19 PDT, seller added the following information: